40" BAILOUT WHIP WITH PARKER S/S QUICK DISCONNECT SET (H002)
The H003 40" bailout whip with Parker S/S Q.D. set attaches from the first stage regulator LP port (3/8"-24 male fitting) to the diver's helmet or mask bailout valve (9/16-18" female swivel nut).
H003 Specifications:
Overall Length: 40" (101.6cm)
Helmet Side Whip: 8" BW-8A (20.3cm)
Q.D. Nipple: SSH2-63Y
First Stage Side Whip: BW-32A
Q.D. Coupler: SSH2-62Y
BW-8A Specifications:
Length: 8" (20.3cm)
I.D.: 1/4" (0.635cm)
Maximum Pressure: 350 psi (24 bar)
Connection 1: 9/16”-18 UNF Female (regulator second stage)
Connection 2: 1/4” NPT Male
SSH2-63Y Specifications
Body Size: 1/4" (6.4mm)
Thread Size: 1/4"-18 NPTF female
Maximum Working Pressure: 5000 psi (340 bar)
Overall Length: 2.26" (57.4mm)
Wrench Flats: 0.81" (20.6mm)
Largest Diameter: 1.14" (29.0mm)
Body Material: 316 Stainless steel
Seal Material: Fluorocarbon
Valve Type: Poppet
Valve Material: 316 Stainless steel
Minimum Operating Temperature: -15°F (-26°C)
Maximum Operating Temperature: 400°F (204°C)
Specifications Met: ISO 7241-1, Series B
Mating Coupler: SSH2-62Y
SSH2-62Y Specifications
Body Size: 1/4" (6.4mm)
Thread Size: 1/4"-18 NPTF female
Maximum Working Pressure: 5000 psi (340 bar)
Overall Length: 2.26" (57.4mm)
Wrench Flats: 0.81" (20.6mm)
Largest Diameter: 1.14" (29.0mm)
Body Material: 316 Stainless steel
Seal Material: Fluorocarbon
Valve Type: Poppet
Sleeve Type: Manual
Lock Type: Locking balls
Valve Material: 316 Stainless steel
Ball Material: Stainless steel
Minimum Operating Temperature: -15°F (-26°C)
Maximum Operating Temperature: 400°F (204°C)
Specifications Met: ISO 7241-1, Series B
Mating Nipple: SSH2-63Y
BW-32A Specifications:
Length: 32" (81.3cm)
I.D.: 1/4" (0.635cm)
Maximum Pressure: 350 psi (24 bar)
Connection 1: 3/8”-24 Male UNF (regulator first stage)
