40" BAILOUT WHIP WITH HY-LOK S/S QUICK DISCONNECT SET (H002)
The H003 40" bailout whip with Hy-Lok S/S Q.D. set attaches from the first stage regulator LP port (3/8"-24 male fitting) to the diver's helmet or mask bailout valve (9/16-18" female swivel nut).
H003 Specifications:
Overall Length: 40" (101.6cm)
Helmet Side Whip: 8" BW-8A (20.3cm)
Q.D. Nipple: Q1SSF-4N-S316
First Stage Side Whip: BW-32A
Q.D. Coupler: Q1BF-4N-S316
BW-8A Specifications:
Length: 8" (20.3cm)
I.D.: 1/4" (0.635cm)
Maximum Pressure: 350 psi (24 bar)
Connection 1: 9/16”-18 UNF Female (regulator second stage)
Connection 2: 1/4” NPT Male
Q1SSF-4N-S316 Specifications:
Connection Thread Size: 1/4" NPT female
Stem: SESO
Maximum Operating Pressure: 3000 psi (207 bar)
Flow Coefficient (Cv): 0.3
L: 2.26" (57.4mm)
H (Width Across Flat): 0.75" (19.1mm)
Mating Coupler: Q1BF-4N-S316
Q1BF-4N-S316 Specifications:
Connection Thread Size: 1/4" NPT female
Maximum Operating Pressure: 3000 psi (207 bar)
L: 2.42" (61.5mm)
D: 0.91" (23.1mm)
H (Width Across Flat): 0.75" (19.1mm)
Mating Nipple: Q1SSF-4N-S316
BW-32A Specifications:
Length: 32" (81.3cm)
I.D.: 1/4" (0.635cm)
Maximum Pressure: 350 psi (24 bar)
Connection 1: 3/8”-24 Male UNF (regulator first stage)
