Hose, 3/8"I.D.x3/4"O.D.,Gates,1125 W.P.,700'+

700'+ GATES 3/8" I.D. DIVE MASTER DIVER'S BREATHING GAS HOSE (33HB.375-700+)

Gates rubber hose is made for handling mixtures of oxygen, helium and nitrogen gases used in diving applications as a breathing gas delivery hose. Made of black synthetic rubber, it is reinforced with two fiber braids and has an abrasion and oil resistant outer jacket. This kink resistant hose is designed for extra long wear under normal operating use.

Specifications
Description 700'+ Lengths of Gates 3/8” I.D. (33HB.375) Dive Master diver's breathing gas hose
Standard Reel Length 700'+ (213+ m)
Inner Diameter 3/8" (9.5 mm)
Outer Diameter: 0.75" (19.1 mm)
Maximum Working Pressure: 1125 psi (77.6 bar)
Minimum Bend Radius: 4.0" (102 mm)
Temperature Range: -20°F to 120°F (-29°C to 49°C)
Tube: Type C (Nitrile), Black
Reinforcement: Braided, high tensile synthetic textile cord
Cover: Type A (chloroprene), black, perforated
Design Factor: 4:1
Weight: 0.19 lb/foot (283 g/m)
Standards: Meets BS EN250:2014
Cleanliness: At the factory, the length of hose is rinsed with water for 30 seconds to 1 minute, followed by a sponge plug blown through the hose to remove water. As second, alcohol soaked sponge is then blown through the hose. followed by air for 30 seconds.
Compatible Fittings: Gates 375B: O2 reusable brass fitting / Gates 375B-6: #6 JIC reusable brass fitting / Lenz 115R: O2 reusable brass fitting